Merge branch 'upstream-merge'HEADnextmaster

* upstream-merge: (575 commits)
  ssi: Add slave autoconnect helper
  MAINTAINERS: Added maintainerships for SSI
  xilinx_zynq: Added SPI controllers + flashes
  xilinx_spips: Xilinx Zynq SPI cntrlr device model
  petalogix-ml605: added SPI controller with n25q128
  xilinx_spi: Initial impl. of Xilinx SPI controller
  m25p80: Initial implementation of SPI flash device
  hw: Added generic FIFO API.
  stellaris: Removed SSI mux
  qdev: allow multiple qdev_init_gpio_in() calls
  ssi: Added create_slave_no_init()
  ssi: Implemented CS behaviour
  ssi: Support for multiple attached devices
  qemu-barrier: Fix compilation on i386 hosts
  target-sparc: Optimize conditionals using SUBCC
  target-sparc: Fall through from not-taken trap
  target-sparc: Cleanup "global" temporary allocation
  target-sparc: Use movcond for FMOV*R
  target-sparc: Use movcond in mulscc
  target-sparc: Move taddcctv and tsubcctv out of line
  ...

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

1 files changed, 70 insertions, 2 deletions

diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
index 490245004..a1d489e42 100644
--- a/fpu/softfloat-specialize.h
+++ b/fpu/softfloat-specialize.h
@@ -41,6 +41,13 @@ these four paragraphs for those parts of this code that are retained.
 #define SNAN_BIT_IS_ONE		0
 #endif
 
+#if defined(TARGET_XTENSA)
+/* Define for architectures which deviate from IEEE in not supporting
+ * signaling NaNs (so all NaNs are treated as quiet).
+ */
+#define NO_SIGNALING_NANS 1
+#endif
+
 /*----------------------------------------------------------------------------
 | The pattern for a default generated half-precision NaN.
 *----------------------------------------------------------------------------*/
@@ -57,7 +64,8 @@ const float16 float16_default_nan = const_float16(0xFE00);
 *----------------------------------------------------------------------------*/
 #if defined(TARGET_SPARC)
 const float32 float32_default_nan = const_float32(0x7FFFFFFF);
-#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
+#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) || \
+      defined(TARGET_XTENSA)
 const float32 float32_default_nan = const_float32(0x7FC00000);
 #elif SNAN_BIT_IS_ONE
 const float32 float32_default_nan = const_float32(0x7FBFFFFF);
@@ -127,6 +135,17 @@ typedef struct {
     uint64_t high, low;
 } commonNaNT;
 
+#ifdef NO_SIGNALING_NANS
+int float16_is_quiet_nan(float16 a_)
+{
+    return float16_is_any_nan(a_);
+}
+
+int float16_is_signaling_nan(float16 a_)
+{
+    return 0;
+}
+#else
 /*----------------------------------------------------------------------------
 | Returns 1 if the half-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -156,6 +175,7 @@ int float16_is_signaling_nan(float16 a_)
     return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF);
 #endif
 }
+#endif
 
 /*----------------------------------------------------------------------------
 | Returns a quiet NaN if the half-precision floating point value `a' is a
@@ -217,6 +237,17 @@ static float16 commonNaNToFloat16(commonNaNT a STATUS_PARAM)
     }
 }
 
+#ifdef NO_SIGNALING_NANS
+int float32_is_quiet_nan(float32 a_)
+{
+    return float32_is_any_nan(a_);
+}
+
+int float32_is_signaling_nan(float32 a_)
+{
+    return 0;
+}
+#else
 /*----------------------------------------------------------------------------
 | Returns 1 if the single-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -246,6 +277,7 @@ int float32_is_signaling_nan( float32 a_ )
     return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
 #endif
 }
+#endif
 
 /*----------------------------------------------------------------------------
 | Returns a quiet NaN if the single-precision floating point value `a' is a
@@ -372,7 +404,7 @@ static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
         return 1;
     }
 }
-#elif defined(TARGET_PPC)
+#elif defined(TARGET_PPC) || defined(TARGET_XTENSA)
 static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
                    flag aIsLargerSignificand)
 {
@@ -586,6 +618,17 @@ static float32 propagateFloat32MulAddNaN(float32 a, float32 b,
     }
 }
 
+#ifdef NO_SIGNALING_NANS
+int float64_is_quiet_nan(float64 a_)
+{
+    return float64_is_any_nan(a_);
+}
+
+int float64_is_signaling_nan(float64 a_)
+{
+    return 0;
+}
+#else
 /*----------------------------------------------------------------------------
 | Returns 1 if the double-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -619,6 +662,7 @@ int float64_is_signaling_nan( float64 a_ )
         && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
 #endif
 }
+#endif
 
 /*----------------------------------------------------------------------------
 | Returns a quiet NaN if the double-precision floating point value `a' is a
@@ -773,6 +817,17 @@ static float64 propagateFloat64MulAddNaN(float64 a, float64 b,
     }
 }
 
+#ifdef NO_SIGNALING_NANS
+int floatx80_is_quiet_nan(floatx80 a_)
+{
+    return floatx80_is_any_nan(a_);
+}
+
+int floatx80_is_signaling_nan(floatx80 a_)
+{
+    return 0;
+}
+#else
 /*----------------------------------------------------------------------------
 | Returns 1 if the extended double-precision floating-point value `a' is a
 | quiet NaN; otherwise returns 0. This slightly differs from the same
@@ -816,6 +871,7 @@ int floatx80_is_signaling_nan( floatx80 a )
         && ( a.low == aLow );
 #endif
 }
+#endif
 
 /*----------------------------------------------------------------------------
 | Returns a quiet NaN if the extended double-precision floating point value
@@ -929,6 +985,17 @@ static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b STATUS_PARAM)
     }
 }
 
+#ifdef NO_SIGNALING_NANS
+int float128_is_quiet_nan(float128 a_)
+{
+    return float128_is_any_nan(a_);
+}
+
+int float128_is_signaling_nan(float128 a_)
+{
+    return 0;
+}
+#else
 /*----------------------------------------------------------------------------
 | Returns 1 if the quadruple-precision floating-point value `a' is a quiet
 | NaN; otherwise returns 0.
@@ -964,6 +1031,7 @@ int float128_is_signaling_nan( float128 a )
         && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) );
 #endif
 }
+#endif
 
 /*----------------------------------------------------------------------------
 | Returns a quiet NaN if the quadruple-precision floating point value `a' is