diff options
Diffstat (limited to 'test/AP+STA/README.txt')
-rw-r--r-- | test/AP+STA/README.txt | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/test/AP+STA/README.txt b/test/AP+STA/README.txt new file mode 100644 index 0000000..6981b94 --- /dev/null +++ b/test/AP+STA/README.txt @@ -0,0 +1,36 @@ +<<How to set up AP+STA>> + +1. Bring up driver: + + a. iw reg set US + --> set regulatory domain. + b. insmod mwlwifi.ko + --> After module is inserted, physical interfaces phy0 and phy1 and network + device wlan0 and wlan1 will be created. You can issue "iw dev" to check them. + +2. Use interface wlan0/wlan1 as client mode to connect to remote AP: + + wpa_supplicant -B -D nl80211 -i wlan0 -c wpa_supplicant.conf + wpa_supplicant -B -D nl80211 -i wlan1 -c wpa_supplicant.conf + +3. Create local AP: + + a. Create anther interface on phy0/phy1: + + iw phy0 interface add wlan0-1 type managed + iw phy1 interface add wlan1-1 type managed + + b. Use iw dev to check channel setting for client mode and modify related channel + setting of hostapd.conf to be complied with currecnt channel setting. + + c. Check MAC address of client interface and add "bssid=02:XX:XX:XX:XX:XX" to hostapd.conf. + + d. Create local AP: + + hostapd -B ./hostapd.conf + --> Channel setting of hostapd.conf should be complied with current channel setting. + Please make sure interface of hostapd.conf is complied with the interface you just created. + +4. Bridge local AP and STA: + + You need to use relayd to bridge them. Same as LAN and STA. |