1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
# Server configuration file example for DHCPv6
# From the file used for TAHI tests.
# IPv6 address valid lifetime
# (at the end the address is no longer usable by the client)
# (set to 30 days, the usual IPv6 default)
default-lease-time 2592000;
# IPv6 address preferred lifetime
# (at the end the address is deprecated, i.e., the client should use
# other addresses for new connections)
# (set to 7 days, the usual IPv6 default)
preferred-lifetime 604800;
# T1, the delay before Renew
# (default is 1/2 preferred lifetime)
# (set to 1 hour)
option dhcp-renewal-time 3600;
# T2, the delay before Rebind (if Renews failed)
# (default is 3/4 preferred lifetime)
# (set to 2 hours)
option dhcp-rebinding-time 7200;
# Enable RFC 5007 support (same than for DHCPv4)
allow leasequery;
# Global definitions for name server address(es) and domain search list
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e;
option dhcp6.domain-search "test.example.com","example.com";
# Set preference to 255 (maximum) in order to avoid waiting for
# additional servers when there is only one
##option dhcp6.preference 255;
# Server side command to enable rapid-commit (2 packet exchange)
##option dhcp6.rapid-commit;
# The delay before information-request refresh
# (minimum is 10 minutes, maximum one day, default is to not refresh)
# (set to 6 hours)
option dhcp6.info-refresh-time 21600;
# The path of the lease file
dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases";
# Static definition (must be global)
host myclient {
# The entry is looked up by this
host-identifier option
dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;
# A fixed address
fixed-address6 3ffe:501:ffff:100::1234;
# A fixed prefix
fixed-prefix6 3ffe:501:ffff:101::/64;
# Override of the global definitions,
# works only when a resource (address or prefix) is assigned
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e;
# For debug (to see when the entry statements are executed)
# (log "sol" when a matching Solicitation is received)
##if packet(0,1) = 1 { log(debug,"sol"); }
}
host otherclient {
# This host entry is hopefully matched if the client supplies a DUID-LL
# or DUID-LLT containing this MAC address.
hardware ethernet 01:00:80:a2:55:67;
fixed-address6 3ffe:501:ffff:100::4321;
}
# The subnet where the server is attached
# (i.e., the server has an address in this subnet)
subnet6 3ffe:501:ffff:100::/64 {
# Two addresses available to clients
# (the third client should get NoAddrsAvail)
range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11;
# Use the whole /64 prefix for temporary addresses
# (i.e., direct application of RFC 4941)
range6 3ffe:501:ffff:100:: temporary;
# Some /64 prefixes available for Prefix Delegation (RFC 3633)
prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64;
}
# A second subnet behind a relay agent
subnet6 3ffe:501:ffff:101::/64 {
range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11;
# Override of the global definitions,
# works only when a resource (address or prefix) is assigned
option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e;
}
# A third subnet behind a relay agent chain
subnet6 3ffe:501:ffff:102::/64 {
range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11;
}
|
