| Age | Commit message (Collapse) | Author |
|---|
|
Babble is the appropriate error in this case (rather then signalling a stall).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This is a preparation patch for completely getting rid of the async-packet
struct in usb-redir, instead relying on the (new) per ep queues in the
qemu usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The shadow copy only serves as an extra check (besides the packet-id) to
ensure the packet we get back is a reply to the packet we think it is.
This check has never triggered in all the time usb-redir is in use now,
and since the verified data in the returned packet-header is not used
otherwise, removing the check does not open any possibilities for the
usbredirhost to confuse us.
This is a preparation patch for completely getting rid of the async-packet
struct in usb-redir, instead relying on the (new) per ep queues in the
qemu usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This is a preparation patch for completely getting rid of the async-packet
struct in usb-redir, instead relying on the (new) per ep queues in the
qemu usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
There is no need for this, and doing so means that a backend trying to
write immediately after an open event will see qemu_chr_be_can_write
returning 0, which not all backends handle well as there is no wakeup
mechanism to detect when the frontend does become writable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
USB_RET_NAK is not a valid response for async handled packets (and will
trigger an assert as such).
Also drop the warning when receiving a status of cancelled for packets not
cancelled by qemu itself, this can happen when a device gets unredirected
by the usbredir-host while transfers are pending.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Since my previous comment said "Should never happen", I tried changing the
next line to an assert(0), which did not go well, which as the new comments
explains is logical if you think about it for a moment.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
USB_RET_PROCERR can be triggered by the guest (by for example requesting more
then BUFFSIZE bytes), so don't assert on it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Currently each time we try to execute a NAK-ed packet we redo
ehci_init_transfer, and usb_packet_map, re-allocing (without freeing) the
sg list every time.
This patch fixes this, it does this by introducing another async state, so
that we also properly cleanup a NAK-ed packet on cancel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
make qemu_queue_{cancel,reset} return the number of packets released,
so the caller can figure whenever there have been active packets even
though there shouldn't have been any. Add tracepoint to log this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Otherwise we'll see the packet free twice in the trace log even though
it actually happens only once.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Reported packets which have completed before being cancelled as such to the
host. Note that the new code path this patch adds is untested since it I've
been unable to actually trigger the race which needs this code path.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update copyright headers to reflect all the work Gerd and I have been doing
on the EHCI emulation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
-combine the qh check with the check for devaddr changes
-also ensure that p gets set to NULL when the queue gets cancelled on
devaddr change, which was not done properly before this patch
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This reverts commit 9bc3a3a216e2689bfcdd36c3e079333bbdbf3ba0, which got
added to fix an issue where the real, underlying cause was not stopping
the ep queue on an error.
Now that the underlying cause is fixed by the "usb: Halt ep queue and
cancel pending packets on a packet error" patch, the "don't flush" fix
is no longer needed.
Not only is it not needed, it causes us to see cancellations (unlinks)
done by the Linux EHCI driver too late, which in combination with the new
usb-core packet-id generation where qtd addresses are used as ids, causes
duplicate ids for in flight packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This can happen with usb-redir live-migration when the packet gets re-queued
after the migration and the original queuing from the migration source side
has already finished.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This way the hcd can re-use the same packet to retry without needing
to re-init it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
If an (emulated) usb-device tries to write more data to a packet then
its iov len, this will trigger an assert in usb_packet_copy(), and if
a driver somehow circumvents that check and writes more data to the
iov then there is space, we have a much bigger problem then not correctly
reporting babble to the guest.
In practice babble will only happen with (real) redirected devices, and there
both the usb-host os and the qemu usb-device code already check for it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The qemu-img, qemu-nbd and qemu-io tools are built conditionally
based on whether any softmmu target is enabled. These are useful
self-contained tools which can be used in many other scenarios.
Add new --enable-tools/--disable-tools args to configure to allow
the user to explicitly turn on / off their build. The default
behaviour is now to build these tools are all times, regardless
of whether any softmmu target is enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Allow passing of '--target-list=' to configure to request that
all targets are to be disabled. This allows for doing a very
fast tools-only build of things like qemu-img, qemu-io, qemu-nbd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This is not used anymore and only written to.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch makes rtc_set_time and rtc_set_cmos work without reading
s->current_tm. In the case of rtc_set_time I introduce a new
function that retrieves the time and stores into a given struct tm
(not hard-coded to s->current_tm). In the case of rtc_set_cmos, the
current time is similarly taken from a struct tm rather than
s->current_tm.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch limits further the usage of a periodic timer. It computes the
time of the next alarm, and uses it to skip all intermediate occurrences
of the timer.
Cc: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The first update cycle begins one-half seconds after divider
reset is removed. This feature is useful for testing.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Calculate guest RTC based on the time of the last update, instead of
using timers. The formula is
(base_rtc + guest_time_now - guest_time_last_update + offset)
Base_rtc is the RTC value when the RTC was last updated.
Guest_time_now is the guest time when the access happens.
Guest_time_last_update was the guest time when the RTC was last updated.
Offset is used when divider reset happens or the set bit is toggled.
The timer is kept in order to signal interrupts, but it only needs to
run when either UF or AF is cleared. When the bits are both set, the
timer does not run.
UIP is now synthesized when reading register A. If the timer is not set,
or if there is more than one second before it (as is the case at the
end of this series), the leading edge of UIP is computed and the rising
edge occurs 220us later. If the update timer occurs within one second,
however, the rising edge of the AF and UF bits should coincide withe
the falling edge of UIP. We do not know exactly when this will happen
because there could be delays in the servicing of the timer. Hence, in
this case reading register A only computes for the rising edge of UIP,
and latches the bit until the timer is fired and clears it.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Also, for consistency with other occurrences, implement VMSTATE_TIMER
as a special case of VMSTATE_TIMER_V rather than VMSTATE_TIMER_TEST.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
If an interrupt flag is already set when the interrupt becomes enabled,
raise an interrupt immediately, and vice versa if interrupts become
disabled.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Changing the DM (binary/BCD) and 24/12 control bit doesn't affect the internal
registers. It only indicates what format is used for those registers.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* qemu-kvm/uq/master:
kvm: i386: Add classic PCI device assignment
kvm: i386: Add services required for PCI device assignment
kvm: Introduce kvm_has_intx_set_mask
kvm: Introduce kvm_irqchip_update_msi_route
kvm: Clean up irqfd API
qemu: Use valgrind annotations to mark kvm guest memory as defined
|
|
* mst/tags/for_anthony:
vhost: Pass device path to vhost_dev_init()
monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
pcie_aer: clear cmask for Advanced Error Interrupt Message Number
pcie: drop version_id field for live migration
qemu: add .exrc
|
|
Commit c3767ed0eb5d0bb25fe409ae5dec06e3411ff1b6 introduced a possible SEGV when
using a socket chardev with server=on because it assumes that all TCP sockets
are in client mode.
This patch adds a check to only reconnect when in client mode.
Cc: Lei Li <lilei@linux.vnet.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit 7b93fadf3a38d1ed65ea5536a52efc2772c6e3b8 "Add basic version
of bridge helper" put the bridge helper executable into a fixed
${prefix}/libexec/ location, instead of using ${libexecdir} for
this. At the same time, --libexecdir is being happily ignored
by ./configure. Even more, the same patch sets unused $libexecdir
variable in the generated config-host.mak, and uses fixed string
(\${prefix}/libexecdir) for the bridge helper binary.
Fix this braindamage by introducing $libexecdir variable, using
it for the bridge helper binary, and recognizing --libexecdir.
This patch is applicable to stable-1.1.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Corey Bryant <coreyb@linux.vnet.ibm.com>
Cc: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
|
|
* 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable:
tcx: tcx_screen_dump(): add error handling
tcx: tcx24_screen_dump(): add error handling
g364fb: g364fb_screen_dump(): add error handling
omap_lcdc: omap_ppm_save(): add error handling
omap_lcdc: rename ppm_save() to omap_ppm_save()
vga: ppm_save(): add error handling
qapi: convert screendump
console: vga_hw_screen_dump_ptr: take Error argument
error: add error_setg()
json-parser: Fix potential NULL pointer segfault
qapi: Fix potential NULL pointer segfault
qapi: convert sendkey
monitor: move key_defs[] table and introduce two help functions
qapi: add the QKeyCode enum
qapi: generate list struct and visit_list for enum
hmp: rename arguments
monitor: rename keyname '<' to 'less'
fix doc of using raw values with sendkey
Add support for pretty-printing response in qmp-shell
|
|
Report from smatch:
mcf5206.c:384 m5206_mbar_readb(7) error: buffer overflow 'm5206_mbar_width' 128 <= 128
mcf5206.c:403 m5206_mbar_readw(8) error: buffer overflow 'm5206_mbar_width' 128 <= 128
mcf5206.c:427 m5206_mbar_readl(8) error: buffer overflow 'm5206_mbar_width' 128 <= 128
mcf5206.c:451 m5206_mbar_writeb(9) error: buffer overflow 'm5206_mbar_width' 128 <= 128
mcf5206.c:475 m5206_mbar_writew(9) error: buffer overflow 'm5206_mbar_width' 128 <= 128
mcf5206.c:503 m5206_mbar_writel(9) error: buffer overflow 'm5206_mbar_width' 128 <= 128
m5206_mbar_width has 0x80 elements and supports 0 <= offset < 0x200.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Report from smatch:
target-arm/helper.c:651 arm946_prbs_read(6) error:
buffer overflow 'env->cp15.c6_region' 8 <= 8
target-arm/helper.c:661 arm946_prbs_write(6) error:
buffer overflow 'env->cp15.c6_region' 8 <= 8
c7_region is an array with 8 elements, so the index must be less than 8.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Report from smatch:
hw/wm8750.c:369 wm8750_tx(12) error: buffer overflow 's->i2c_data' 2 <= 2
It looks like the preprocessor statements were simply misplaced.
Replace also __FUNCTION__ by __func__ to please checkpatch.pl.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
This adds PCI device assignment for i386 targets using the classic KVM
interfaces. This version is 100% identical to what is being maintained
in qemu-kvm for several years and is supported by libvirt as well. It is
expected to remain relevant for another couple of years until kernels
without full-features and performance-wise equivalent VFIO support are
obsolete.
A refactoring to-do that should be done in-tree is to model MSI and
MSI-X support via the generic PCI layer, similar to what VFIO is already
doing for MSI-X. This should improve the correctness and clean up the
code from duplicate logic.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
These helpers abstract the interaction of upcoming pci-assign with the
KVM kernel services. Put them under i386 only as other archs will
implement device pass-through via VFIO and not this classic interface.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Will be used by PCI device assignment code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This service allows to update an MSI route without releasing/reacquiring
the associated VIRQ. Will be used by PCI device assignment, later on
likely also by virtio/vhost and VFIO.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The load/store slow path has been broken in e141ab52d:
- We need to move 4 registers for store functions and 3 registers for
load functions and not the reverse.
- According to the s390x calling convention the arguments of a function
should be zero extended. This means that the register shift should be
done with TCG_TYPE_I64 to ensure the higher word is correctly zero
extended when needed.
I am aware that CONFIG_TCG_PASS_AREG0 is being removed and thus that
this patch can be improved, but doing so means it can also be applied to
the 1.1 and 1.2 stable branches.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUState parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix conflicts]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
Hans de Goede
Gerd Hoffmann
Daniel P. Berrange
Paolo Bonzini
Yang Zhang
Anthony Liguori
Michael Tokarev
Aurelien Jarno
Stefan Weil
Jan Kiszka
Blue Swirl