From 5e32353d318835a76f0bb61fd62271c30a43ee22 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 18 Oct 2012 11:01:14 +0000 Subject: net/at91_ether: use ethtool and mdio from macb This rips out the at91_ether phy handling and ethtool stuff and replace it with equivalent stuff from macb. The only thing lost is the phy irq support from at91_ether, but this can be added to macb and then benefit all users. Signed-off-by: Joachim Eastwood --- drivers/net/ethernet/cadence/at91_ether.c | 636 ++---------------------------- drivers/net/ethernet/cadence/at91_ether.h | 61 --- drivers/net/ethernet/cadence/macb.h | 7 - 3 files changed, 31 insertions(+), 673 deletions(-) delete mode 100644 drivers/net/ethernet/cadence/at91_ether.h diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 4da36b8dd25..a1e0949e644 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -36,382 +35,11 @@ #include #include -#include -#include - -#include "at91_ether.h" #include "macb.h" #define DRV_NAME "at91_ether" #define DRV_VERSION "1.0" -#define LINK_POLL_INTERVAL (HZ) - -/* ........................... PHY INTERFACE ........................... */ - -/* - * Enable the MDIO bit in MAC control register - * When not called from an interrupt-handler, access to the PHY must be - * protected by a spinlock. - */ -static void enable_mdi(struct macb *lp) -{ - unsigned long ctl; - - ctl = macb_readl(lp, NCR); - macb_writel(lp, NCR, ctl | MACB_BIT(MPE)); /* enable management port */ -} - -/* - * Disable the MDIO bit in the MAC control register - */ -static void disable_mdi(struct macb *lp) -{ - unsigned long ctl; - - ctl = macb_readl(lp, NCR); - macb_writel(lp, NCR, ctl & ~MACB_BIT(MPE)); /* disable management port */ -} - -/* - * Wait until the PHY operation is complete. - */ -static inline void at91_phy_wait(struct macb *lp) -{ - unsigned long timeout = jiffies + 2; - - while (!(macb_readl(lp, NSR) & MACB_BIT(IDLE))) { - if (time_after(jiffies, timeout)) { - printk("at91_ether: MIO timeout\n"); - break; - } - cpu_relax(); - } -} - -/* - * Write value to the a PHY register - * Note: MDI interface is assumed to already have been enabled. - */ -static void write_phy(struct macb *lp, unsigned char phy_addr, unsigned char address, unsigned int value) -{ - macb_writel(lp, MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE) - | MACB_BF(RW, MACB_MAN_WRITE) | ((phy_addr & 0x1f) << 23) - | (address << 18) | (value & ((1<mii)) { /* no link */ - netif_carrier_off(dev); - if (!silent) - printk(KERN_INFO "%s: Link down.\n", dev->name); - return; - } - - /* Link up, or auto-negotiation still in progress */ - read_phy(lp, lp->phy_address, MII_BMSR, &bmsr); - read_phy(lp, lp->phy_address, MII_BMCR, &bmcr); - if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */ - if (!(bmsr & BMSR_ANEGCOMPLETE)) - return; /* Do nothing - another interrupt generated when negotiation complete */ - - read_phy(lp, lp->phy_address, MII_LPA, &lpa); - if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100; - else speed = SPEED_10; - if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL; - else duplex = DUPLEX_HALF; - } else { - speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10; - duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; - } - - /* Update the MAC */ - mac_cfg = macb_readl(lp, NCFGR) & ~(MACB_BIT(SPD) | MACB_BIT(FD)); - if (speed == SPEED_100) { - if (duplex == DUPLEX_FULL) /* 100 Full Duplex */ - mac_cfg |= MACB_BIT(SPD) | MACB_BIT(FD); - else /* 100 Half Duplex */ - mac_cfg |= MACB_BIT(SPD); - } else { - if (duplex == DUPLEX_FULL) /* 10 Full Duplex */ - mac_cfg |= MACB_BIT(FD); - else {} /* 10 Half Duplex */ - } - macb_writel(lp, NCFGR, mac_cfg); - - if (!silent) - printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex"); - netif_carrier_on(dev); -} - -/* - * Handle interrupts from the PHY - */ -static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct macb *lp = netdev_priv(dev); - unsigned int phy; - - /* - * This hander is triggered on both edges, but the PHY chips expect - * level-triggering. We therefore have to check if the PHY actually has - * an IRQ pending. - */ - enable_mdi(lp); - if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { - read_phy(lp, lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */ - if (!(phy & (1 << 0))) - goto done; - } - else if (lp->phy_type == MII_LXT971A_ID) { - read_phy(lp, lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */ - if (!(phy & (1 << 2))) - goto done; - } - else if (lp->phy_type == MII_BCM5221_ID) { - read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */ - if (!(phy & (1 << 0))) - goto done; - } - else if (lp->phy_type == MII_KS8721_ID) { - read_phy(lp, lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */ - if (!(phy & ((1 << 2) | 1))) - goto done; - } - else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */ - read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &phy); - if (!(phy & ((1 << 2) | 1))) - goto done; - } - else if (lp->phy_type == MII_DP83848_ID) { - read_phy(lp, lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */ - if (!(phy & (1 << 7))) - goto done; - } - - update_linkspeed(dev, 0); - -done: - disable_mdi(lp); - - return IRQ_HANDLED; -} - -/* - * Initialize and enable the PHY interrupt for link-state changes - */ -static void enable_phyirq(struct net_device *dev) -{ - struct macb *lp = netdev_priv(dev); - unsigned int dsintr, irq_number; - int status; - - if (!gpio_is_valid(lp->board_data.phy_irq_pin)) { - /* - * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L), - * or board does not have it connected. - */ - mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL); - return; - } - - irq_number = gpio_to_irq(lp->board_data.phy_irq_pin); - status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev); - if (status) { - printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status); - return; - } - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */ - read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr); - dsintr = dsintr & ~0xf00; /* clear bits 8..11 */ - write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr); - } - else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */ - read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr); - dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */ - write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr); - } - else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */ - dsintr = (1 << 15) | ( 1 << 14); - write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr); - } - else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */ - dsintr = (1 << 10) | ( 1 << 8); - write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr); - } - else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ - read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr); - dsintr = dsintr | 0x500; /* set bits 8, 10 */ - write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr); - } - else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ - read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr); - dsintr = dsintr | 0x3c; /* set bits 2..5 */ - write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr); - read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr); - dsintr = dsintr | 0x3; /* set bits 0,1 */ - write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr); - } - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); -} - -/* - * Disable the PHY interrupt - */ -static void disable_phyirq(struct net_device *dev) -{ - struct macb *lp = netdev_priv(dev); - unsigned int dsintr; - unsigned int irq_number; - - if (!gpio_is_valid(lp->board_data.phy_irq_pin)) { - del_timer_sync(&lp->check_timer); - return; - } - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */ - read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr); - dsintr = dsintr | 0xf00; /* set bits 8..11 */ - write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr); - } - else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */ - read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr); - dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */ - write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr); - } - else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */ - read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &dsintr); - dsintr = ~(1 << 14); - write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr); - } - else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */ - read_phy(lp, lp->phy_address, MII_TPISTATUS, &dsintr); - dsintr = ~((1 << 10) | (1 << 8)); - write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr); - } - else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ - read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr); - dsintr = dsintr & ~0x500; /* clear bits 8, 10 */ - write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr); - } - else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ - read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr); - dsintr = dsintr & ~0x3; /* clear bits 0, 1 */ - write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr); - read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr); - dsintr = dsintr & ~0x3c; /* clear bits 2..5 */ - write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr); - } - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); - - irq_number = gpio_to_irq(lp->board_data.phy_irq_pin); - free_irq(irq_number, dev); /* Free interrupt handler */ -} - -/* - * Perform a software reset of the PHY. - */ -#if 0 -static void reset_phy(struct net_device *dev) -{ - struct macb *lp = netdev_priv(dev); - unsigned int bmcr; - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - /* Perform PHY reset */ - write_phy(lp, lp->phy_address, MII_BMCR, BMCR_RESET); - - /* Wait until PHY reset is complete */ - do { - read_phy(lp, lp->phy_address, MII_BMCR, &bmcr); - } while (!(bmcr & BMCR_RESET)); - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); -} -#endif - -static void at91ether_check_link(unsigned long dev_id) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct macb *lp = netdev_priv(dev); - - enable_mdi(lp); - update_linkspeed(dev, 1); - disable_mdi(lp); - - mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL); -} - -/* - * Perform any PHY-specific initialization. - */ -static void __init initialize_phy(struct macb *lp) -{ - unsigned int val; - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { - read_phy(lp, lp->phy_address, MII_DSCR_REG, &val); - if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */ - lp->phy_media = PORT_FIBRE; - } else if (machine_is_csb337()) { - /* mix link activity status into LED2 link state */ - write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x0d22); - } else if (machine_is_ecbat91()) - write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x156A); - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); -} - /* ......................... ADDRESS MANAGEMENT ........................ */ /* @@ -617,109 +245,6 @@ static void at91ether_set_multicast_list(struct net_device *dev) macb_writel(lp, NCFGR, cfg); } -/* ......................... ETHTOOL SUPPORT ........................... */ - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - struct macb *lp = netdev_priv(dev); - unsigned int value; - - read_phy(lp, phy_id, location, &value); - return value; -} - -static void mdio_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct macb *lp = netdev_priv(dev); - - write_phy(lp, phy_id, location, value); -} - -static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct macb *lp = netdev_priv(dev); - int ret; - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - ret = mii_ethtool_gset(&lp->mii, cmd); - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); - - if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */ - cmd->supported = SUPPORTED_FIBRE; - cmd->port = PORT_FIBRE; - } - - return ret; -} - -static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct macb *lp = netdev_priv(dev); - int ret; - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - ret = mii_ethtool_sset(&lp->mii, cmd); - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); - - return ret; -} - -static int at91ether_nwayreset(struct net_device *dev) -{ - struct macb *lp = netdev_priv(dev); - int ret; - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - - ret = mii_nway_restart(&lp->mii); - - disable_mdi(lp); - spin_unlock_irq(&lp->lock); - - return ret; -} - -static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info)); -} - -static const struct ethtool_ops at91ether_ethtool_ops = { - .get_settings = at91ether_get_settings, - .set_settings = at91ether_set_settings, - .get_drvinfo = at91ether_get_drvinfo, - .nway_reset = at91ether_nwayreset, - .get_link = ethtool_op_get_link, -}; - -static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct macb *lp = netdev_priv(dev); - int res; - - if (!netif_running(dev)) - return -EINVAL; - - spin_lock_irq(&lp->lock); - enable_mdi(lp); - res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL); - disable_mdi(lp); - spin_unlock_irq(&lp->lock); - - return res; -} - /* ................................ MAC ................................ */ /* @@ -765,8 +290,6 @@ static int at91ether_open(struct net_device *dev) if (!is_valid_ether_addr(dev->dev_addr)) return -EADDRNOTAVAIL; - clk_enable(lp->pclk); /* Re-enable Peripheral clock */ - /* Clear internal statistics */ ctl = macb_readl(lp, NCR); macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT)); @@ -774,23 +297,18 @@ static int at91ether_open(struct net_device *dev) /* Update the MAC address (incase user has changed it) */ update_mac_address(dev); - /* Enable PHY interrupt */ - enable_phyirq(dev); - /* Enable MAC interrupts */ macb_writel(lp, IER, MACB_BIT(RCOMP) | MACB_BIT(RXUBR) | MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE) | MACB_BIT(TCOMP) | MACB_BIT(ISR_ROVR) | MACB_BIT(HRESP)); - /* Determine current link speed */ - spin_lock_irq(&lp->lock); - enable_mdi(lp); - update_linkspeed(dev, 0); - disable_mdi(lp); - spin_unlock_irq(&lp->lock); - at91ether_start(dev); + + /* schedule a link state check */ + phy_start(lp->phy_dev); + netif_start_queue(dev); + return 0; } @@ -806,9 +324,6 @@ static int at91ether_close(struct net_device *dev) ctl = macb_readl(lp, NCR); macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE))); - /* Disable PHY interrupt */ - disable_phyirq(dev); - /* Disable MAC interrupts */ macb_writel(lp, IDR, MACB_BIT(RCOMP) | MACB_BIT(RXUBR) | MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE) @@ -817,8 +332,6 @@ static int at91ether_close(struct net_device *dev) netif_stop_queue(dev); - clk_disable(lp->pclk); /* Disable Peripheral clock */ - return 0; } @@ -989,7 +502,7 @@ static const struct net_device_ops at91ether_netdev_ops = { .ndo_get_stats = at91ether_stats, .ndo_set_rx_mode = at91ether_set_multicast_list, .ndo_set_mac_address = set_mac_address, - .ndo_do_ioctl = at91ether_ioctl, + .ndo_do_ioctl = macb_ioctl, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -997,48 +510,6 @@ static const struct net_device_ops at91ether_netdev_ops = { #endif }; -/* - * Detect the PHY type, and its address. - */ -static int __init at91ether_phy_detect(struct macb *lp) -{ - unsigned int phyid1, phyid2; - unsigned long phy_id; - unsigned short phy_address = 0; - - while (phy_address < PHY_MAX_ADDR) { - /* Read the PHY ID registers */ - enable_mdi(lp); - read_phy(lp, phy_address, MII_PHYSID1, &phyid1); - read_phy(lp, phy_address, MII_PHYSID2, &phyid2); - disable_mdi(lp); - - phy_id = (phyid1 << 16) | (phyid2 & 0xfff0); - switch (phy_id) { - case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */ - case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */ - case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */ - case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */ - case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */ - case MII_DP83847_ID: /* National Semiconductor DP83847: */ - case MII_DP83848_ID: /* National Semiconductor DP83848: */ - case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ - case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ - case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ - case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ - /* store detected values */ - lp->phy_type = phy_id; /* Type of PHY connected */ - lp->phy_address = phy_address; /* MDI address of PHY */ - return 1; - } - - phy_address++; - } - - return 0; /* not detected */ -} - - /* * Detect MAC & PHY and perform ethernet interface initialization */ @@ -1047,6 +518,7 @@ static int __init at91ether_probe(struct platform_device *pdev) struct macb_platform_data *board_data = pdev->dev.platform_data; struct resource *regs; struct net_device *dev; + struct phy_device *phydev; struct macb *lp; int res; @@ -1059,6 +531,8 @@ static int __init at91ether_probe(struct platform_device *pdev) return -ENOMEM; lp = netdev_priv(dev); + lp->pdev = pdev; + lp->dev = dev; lp->board_data = *board_data; spin_lock_init(&lp->lock); @@ -1093,7 +567,7 @@ static int __init at91ether_probe(struct platform_device *pdev) ether_setup(dev); dev->netdev_ops = &at91ether_netdev_ops; - dev->ethtool_ops = &at91ether_ethtool_ops; + dev->ethtool_ops = &macb_ethtool_ops; platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); @@ -1102,49 +576,27 @@ static int __init at91ether_probe(struct platform_device *pdev) macb_writel(lp, NCR, 0); - if (board_data->is_rmii) + if (board_data->is_rmii) { macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII)); - else + lp->phy_interface = PHY_INTERFACE_MODE_RMII; + } else { macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG)); - - /* Detect PHY */ - if (!at91ether_phy_detect(lp)) { - printk(KERN_ERR "at91_ether: Could not detect ethernet PHY\n"); - res = -ENODEV; - goto err_free_dmamem; + lp->phy_interface = PHY_INTERFACE_MODE_MII; } - initialize_phy(lp); - - lp->mii.dev = dev; /* Support for ethtool */ - lp->mii.mdio_read = mdio_read; - lp->mii.mdio_write = mdio_write; - lp->mii.phy_id = lp->phy_address; - lp->mii.phy_id_mask = 0x1f; - lp->mii.reg_num_mask = 0x1f; - /* Register the network interface */ res = register_netdev(dev); if (res) goto err_free_dmamem; - /* Determine current link speed */ - spin_lock_irq(&lp->lock); - enable_mdi(lp); - update_linkspeed(dev, 0); - disable_mdi(lp); - spin_unlock_irq(&lp->lock); + if (macb_mii_init(lp) != 0) + goto err_out_unregister_netdev; + netif_carrier_off(dev); /* will be enabled in open() */ - /* If board has no PHY IRQ, use a timer to poll the PHY */ - if (gpio_is_valid(lp->board_data.phy_irq_pin)) { - gpio_request(board_data->phy_irq_pin, "ethernet_phy"); - } else { - /* If board has no PHY IRQ, use a timer to poll the PHY */ - init_timer(&lp->check_timer); - lp->check_timer.data = (unsigned long)dev; - lp->check_timer.function = at91ether_check_link; - } + phydev = lp->phy_dev; + netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", + phydev->drv->name, dev_name(&phydev->dev), phydev->irq); /* Display ethernet banner */ printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n", @@ -1152,32 +604,11 @@ static int __init at91ether_probe(struct platform_device *pdev) macb_readl(lp, NCFGR) & MACB_BIT(SPD) ? "100-" : "10-", macb_readl(lp, NCFGR) & MACB_BIT(FD) ? "FullDuplex" : "HalfDuplex", dev->dev_addr); - if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) - printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)"); - else if (lp->phy_type == MII_LXT971A_ID) - printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name); - else if (lp->phy_type == MII_RTL8201_ID) - printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name); - else if (lp->phy_type == MII_BCM5221_ID) - printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name); - else if (lp->phy_type == MII_DP83847_ID) - printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name); - else if (lp->phy_type == MII_DP83848_ID) - printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); - else if (lp->phy_type == MII_AC101L_ID) - printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); - else if (lp->phy_type == MII_KS8721_ID) - printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); - else if (lp->phy_type == MII_T78Q21x3_ID) - printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name); - else if (lp->phy_type == MII_LAN83C185_ID) - printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name); - - clk_disable(lp->pclk); /* Disable Peripheral clock */ return 0; - +err_out_unregister_netdev: + unregister_netdev(dev); err_free_dmamem: platform_set_drvdata(pdev, NULL); dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); @@ -1198,16 +629,21 @@ static int __devexit at91ether_remove(struct platform_device *pdev) struct net_device *dev = platform_get_drvdata(pdev); struct macb *lp = netdev_priv(dev); - if (gpio_is_valid(lp->board_data.phy_irq_pin)) - gpio_free(lp->board_data.phy_irq_pin); + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); unregister_netdev(dev); free_irq(dev->irq, dev); dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); + iounmap(lp->regs); + clk_disable(lp->pclk); clk_put(lp->pclk); - - platform_set_drvdata(pdev, NULL); free_netdev(dev); + platform_set_drvdata(pdev, NULL); + return 0; } @@ -1219,11 +655,6 @@ static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg) struct macb *lp = netdev_priv(net_dev); if (netif_running(net_dev)) { - if (gpio_is_valid(lp->board_data.phy_irq_pin)) { - int phy_irq = gpio_to_irq(lp->board_data.phy_irq_pin); - disable_irq(phy_irq); - } - netif_stop_queue(net_dev); netif_device_detach(net_dev); @@ -1242,11 +673,6 @@ static int at91ether_resume(struct platform_device *pdev) netif_device_attach(net_dev); netif_start_queue(net_dev); - - if (gpio_is_valid(lp->board_data.phy_irq_pin)) { - int phy_irq = gpio_to_irq(lp->board_data.phy_irq_pin); - enable_irq(phy_irq); - } } return 0; } diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h deleted file mode 100644 index 4bc74a31956..00000000000 --- a/drivers/net/ethernet/cadence/at91_ether.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Ethernet driver for the Atmel AT91RM9200 (Thunder) - * - * Copyright (C) SAN People (Pty) Ltd - * - * Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc. - * Initial version by Rick Bronson. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef AT91_ETHERNET -#define AT91_ETHERNET - - -/* Davicom 9161 PHY */ -#define MII_DM9161_ID 0x0181b880 -#define MII_DM9161A_ID 0x0181b8a0 -#define MII_DSCR_REG 16 -#define MII_DSCSR_REG 17 -#define MII_DSINTR_REG 21 - -/* Intel LXT971A PHY */ -#define MII_LXT971A_ID 0x001378E0 -#define MII_ISINTE_REG 18 -#define MII_ISINTS_REG 19 -#define MII_LEDCTRL_REG 20 - -/* Realtek RTL8201 PHY */ -#define MII_RTL8201_ID 0x00008200 - -/* Broadcom BCM5221 PHY */ -#define MII_BCM5221_ID 0x004061e0 -#define MII_BCMINTR_REG 26 - -/* National Semiconductor DP83847 */ -#define MII_DP83847_ID 0x20005c30 - -/* National Semiconductor DP83848 */ -#define MII_DP83848_ID 0x20005c90 -#define MII_DPPHYSTS_REG 16 -#define MII_DPMICR_REG 17 -#define MII_DPMISR_REG 18 - -/* Altima AC101L PHY */ -#define MII_AC101L_ID 0x00225520 - -/* Micrel KS8721 PHY */ -#define MII_KS8721_ID 0x00221610 - -/* Teridian 78Q2123/78Q2133 */ -#define MII_T78Q21x3_ID 0x000e7230 -#define MII_T78Q21INT_REG 17 - -/* SMSC LAN83C185 */ -#define MII_LAN83C185_ID 0x0007C0A0 - -#endif diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 335d1119774..fd2961a4fca 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -555,17 +555,10 @@ struct macb { phy_interface_t phy_interface; /* at91_private */ - struct mii_if_info mii; /* ethtool support */ struct macb_platform_data board_data; /* board-specific * configuration (shared with * macb for common data */ - /* PHY */ - unsigned long phy_type; /* type of PHY (PHY_ID) */ - short phy_media; /* media interface type */ - unsigned short phy_address; /* 5-bit MDI address of PHY (0..31) */ - struct timer_list check_timer; /* Poll link status */ - /* Transmit */ struct sk_buff *skb; /* holds skb until xmit interrupt completes */ dma_addr_t skb_physaddr; /* phys addr from pci_map_single */ -- cgit v1.2.3